Bespoke Door Canopies
 BespokeDoorCanopies                   

 Georgian door surrounds

 

Bespoke, made to measure timber Georgian door surround kits start around £1500 + delivery costs, for a single door width plain door surround with a leaded flat canopy (without a fanlight or transom window above the door). The door surround kits usually comprise: 2 x side pillars/pilasters, 1 x top canopy covered in a one piece, code 4 thickness lead sheet, dressed to fit with straight cut edges.

 

The dressed lead sheet covering the canopy, will usually have a ready formed wall upstand, for sealing against the wall or into a brickwork  joint. All face timber will come finished in white primer, ready for you to fit and finish, as required.

 

 

# Please note, the maximum sizes of code 4 lead sheet covered canopies I make, come with a max projection of 13 inches (330mm) and a max canopy width of 59 inches (1.5 metres) #

 

 

Below is an example of a large, quite decorative Georgian surround kit. The last photograph shows it fitted & finished, the customer kindly sent the photo.  

 

 

 

 

All my work is very individual, handmade and not mass produced by machines.

 

 

Any questions, just ask.

Georgian door surround kit, as supplied www.bespokedoorcanopies.co.uk
www.bespokedoorcanopies.co.uk
Fitted and finished by customer. www.bespokedoorcanopies.co.uk

Timber door surround pillars or posts  

                 If you need to replace your existing wooden door surround pillars or support posts only, I may be able to help.                                                                                                                

     Below are examples of previous ones I've made and supplied. They start around £800 + delivery costs, for a pair of made to measure timber pillars. Replicate your existing pillars closely or send me a photo of a design you like and sizes  and I'll help if I can.

 

                                   

 

                      All my work is very individual, handmade and not mass produced by machines.

 

 

Any questions, just ask.

 

 

Mono pitch timber door canopies

Bespoke, made to measure timber open framed mono pitch door canopy framework kits start around £900 + delivery costs, for a single door width, plain design kit. They normally comes finished in a coat of white primer.

 

Once you've fitted and covered the door canopy, it should then be suitably sealed against the wall to weatherproof.

A large, open framework design is shown below, with a further photograph showing it fitted and finished by the customer.  

 

 

 

 

All my work is very individual, handmade and not mass produced by machines.

 

 

Any questions, just ask.

Monopitch canopy kit, as supplied. www.bespokedoorcanopies.co.uk
Fitted, covered and finished by the customer. www.bespokedoorcanopies.co.uk

    Apex shape wood canopies

Starting around £800 + delivery costs, for a bespoke, made to measure single door width, apex shape canopy framework kit and a pair of plain gallows brackets in softwood. All woodwork comes finished in a white primer, unless otherwise specified. Once fitted, the door canopy framework can be covered in your choice of slates, tiles or felt shingle and suitably sealed against the wall to weatherproof.

 

The photos below shows a decorative made to measure apex shaped canopy framework kit inc shaped gallows brackets. A photograph has then been kindly sent to me by the customer, showing it fitted, covered and finished.

 

 

 

All my work is very individual, handmade and not mass produced by machines

 

 

Any questions, just ask.

www.bespokedoorcanopies.co.uk
www.bespokedoorcanopies.co.uk
Apex door canopy kit, as supplied. www.bespokedoorcanopies.co.uk
Fitted and finished by the customer www.bespokedoorcanopies.co.uk

  Timber flat door canopies

Flat door canopy made to measure kits start around £500 + delivery costs, for a plain made to measure single door width flat canopy and a pair of plain gallows brackets. The timber will have a white primer finish, unless otherwise specified. A roofing felt covering kit of medium grade roofing felt, clout nails and adhesive can be ordered, as an optional extra.

 

Once fitted, the door canopy should be covered then suitably sealed against the wall to weatherproof. Below is an example of a large flat wooden canopy, with a panelled underside and timber mouldings to the lower edges, as supplied. Then shown fitted, covered and finished by the customer, who kindly sent in the last photograph. 

 

 

 

All my work is very individual, handmade and not mass produced by machines.

 

 

Any questions, just ask.

Flat door canopy, as supplied. www.bespokedoorcanopies.co.uk
www.bespokedoorcanopies.co.uk
Fitted, covered and finished by the customer www.bespokedoorcanopies.co.uk

Small leaded canopies 

 

Small, made to measure lead covered wooden door canopy kits start around £700 + delivery costs. The timbers will come finished in a white primer, all assembly and wall fixings are included. Ready for you to then fit and finish.

 

 # Please note the maximum sizes of code 4 lead sheet covered canopies I make, come with a max projection of 13 inches (330mm) and a max width of 59 inches (1.5 metres) #

 

The kits can be either collected from me in Leeds or delivery arranged at costShown below are several examples, I've made previously.

 

 

 

All my work is very individual, handmade and not mass produced by machines.

 

 

Any questions, just ask.

Wooden Gallows brackets

My wooden gallows brackets come in all shapes, sizes and designs. Used for decorative purposes or to help carry the weight of your door canopy. Bespoke, made to measure plain gallows brackets cost from £100+ delivery costs.

 Also, I can closely replicate your existing gallows brackets, just let me have full details.

 

They are made using traditional methods and materials, not plastic or GRP and will come in a white primer finish or bare wood, if required. The photos below, show an example of a made to measure, large pair of decorative gallows brackets. The last photo shows them fitted by the customer.

 

 
           
 
    All my work is very individual, handmade and not mass produced by machines

 

Any questions, just ask.

 

Gallows brackets, as supplied. www.bespokedoorcanopies.co.uk
www.bespokedoorcanopies.co.uk
Typically, my gallows brackets are sent via Parcelforce 48 in the UK www.bespokedoorcanopies.co.uk
Fitted and finished by the customer. www.bespokedoorcanopies.co.uk

Wooden Corbels & shelf brackets

Made to measure decorative solid wooden corbels, kitchen cooker hood supports or fireplace mantelpiece supports and book shelf brackets start around £80 + delivery costs, per pair. Pictures below show a pair of shaped corbels, used to support a feature shelf in the customer's kitchen.

 

You can collect from me in Leeds or they can be delivered via Parcelforce 48 in the UK. Let me have the details and I'll help if I can.

 

         

 

    All my work is very individual, handmade and not mass produced by machines.

 

                                                                              Any questions just ask.

Wooden corbels, as supplied. www.bespokedoorcanopies.co.uk
Solid pine corbels fitted, supporting a feature kitchen shelf. Neasham, Darlington, Co Durham. www.bespokedoorcanopies.co.uk

                                                                                    

 

 

 

Email:  bespokedoorcanopies@outlook.com

 

 

  YOUR HOME NEEDS ONE OF MY CANOPIES!

Print Print | Sitemap Recommend this page Recommend this page
The products, pictures and contents of this website are Copyright 2012 © Peter McDonnell, Bespoke Door Canopies. If you have any questions or want further information, let me know..

Call

E-mail

Directions